Mitsubishi Electric Melsec Q Series User Manual page 139

6
FUNCTIONS
(1) The job can be started only when the device tags used for trigger conditions
of all jobs have been sampled normally. *1
*1 When the first five digits of the serial No. is "11011" or earlier, the operation of the MES interface
module is different.
Appendix 1.3 (2) Trigger monitoring function
(2) If [Value monitoring startup] is selected, the tag component value used for
trigger monitoring and the one used in the started job may be collected at
different timings.
To collect these tag component values synchronously, use [Handshake
operation].
Section 7.10.2 (8) Handshake operation
6.1 DB Interface Function
6.1.4 Trigger monitoring function
1
2
3
4
5
6
7
8
6
- 6