Mitsubishi Electric Melsec Q Series User Manual page 399

APPENDICES
6 Select [Online] → [Write to PLC] to write the changed system parameters/CPU
parameters and module parameters.
7 Reset the CPU module.
The startup time between QJ71MES96N and QJ71MES96 differs.
When replacing QJ71MES96 with QJ71MES96N, check if the startup time affects
the processing to execute a job by synchronizing with a sequence program.
If a job does not start up due to the startup time of the MES interface module, add
processing to check that 'Information linkage status (X5)' is in execution (ON).
(
Appendix 1 Functions Added in MES Interface Module and MX MESInterface
Appendix 1.1 Comparison between QJ71MES96N and QJ71MES96
Section 2.6.5 (1) Startup time)
9
10
App
- 3