Checking The Operation Status Of The Mes Interface Function - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.13.1 Checking the operation status of the MES interface function

The operation status of the MES interface function and the error status of the MES
interface module can be checked.
The following explains the display of [Module status].
The display of [Module status] is updated every 3 seconds.
(1) [Operation status]
(2) [Error status]
Table 7.93 Items displayed for [Operation status]
Display
Running Displayed when the MES interface function is running.
Displayed when the MES interface function is stopped.
Stop (Even if trigger conditions are met, no job will be executed during stop of
the function.)
Displayed during the operations indicated below.
• Perform [Update settings]
• Power OFF and then ON
Initializing
• Reset the programmable controller CPU
(Even if trigger conditions are met, no job will be executed during
initialization.)
Displayed when the operation status of the MES interface function is
Stopping
changing to the [Stop] status.
Displayed when MES Interface Function Configuration Tool is acquiring
Getting status
the status data from the MES interface module.
Displayed when MES Interface Function Configuration Tool has failed in
Acquirement failed
connection for acquiring the status data from the MES interface module.
Table 7.94 Items displayed for [Error status]
Display
None Displayed when the MES interface module is operating normally.
Displayed when a module continuation error has occurred in the MES
interface module.
Continuation error
Displayed when a module stop error has occurred in the MES interface
module.
Stop error
7.13.1 Checking the operation status of the MES interface function
Figure 7.106 [Module status]
Description
Meaning
Section 10.1.2 Error types
Section 10.1.2 Error types
7.13 Online - Remote operation
1
2
3
4
5
6
7
8
7
- 137