Mitsubishi Electric Melsec Q Series User Manual page 126

5
INSTALLATION AND UNINSTALLATION
(From the previous page)
(To the next page)
5
- 4 5.1 Installation
2 The dialog box for selecting the component to be
installed is displayed.
Select the component to be installed with the
radio button, then click the
The procedures up to step 8 are common for each
tool.
*1
3 If the left message
button and after uninstalling MX MESInterface,
install this product.
*1 When installing DB Connection Service Setting
Tool, the screen shown on the left is displayed.
4 If the left message appears, install this product on
a computer to which the operating system
compatible with the product is installed.
Section 2.4 Operating Environment
5 If the left message appears, execute
\EnvMEL\SETUP.EXE in the CD-ROM for this
product.
6 After executing SETUP.EXE, install this product.
7 If the product is not installed correctly at the time,
restart the computer.
8 After completion of the "Environment of
MELSOFT" installation, the "Program
Compatibility Assistant" shown on the left may
appear.
9 Click "This program installed correctly" and close
the window.
10 Do not select "Reinstall using recommended
settings", because the installer installs an
incorrect module.
Install button.
appears, click the OK