Mitsubishi Electric Melsec Q Series User Manual page 354

Programmable contoller mes interface module
Hide thumbs Also See for Melsec Q Series:
Table of Contents

Advertisement

10
TROUBLESHOOTING
Error code
0B0Bh
0B0Ch
0B0Dh
0B0Eh
to
0B1Eh
0B1Fh
0B20h
0B21h
0B22h
0B23h
0B24h
0B25h
to
0B28h
0B29h
10
- 13
10.2 Error Code List
10.2.1 Error codes for the MES interface module
Table 10.3 Error codes for the MES interface module
Error name
The CompactFlash card may be
Setting read error
corrupted.
DB connection service
An Ethernet communication error has
communication error
occurred.
System error
The data could not be converted to the
Type conversion error
specified type.
Tag write error
Failed to write data to the tag.
System error
Tag access error
Failed to read or write the tag.
System error
Tag value read error
Failed to read data from the tag.
System error
Type conversion to tag
The data could not be converted to the
component error
type specified for the tag component.
Description
• Replace the CompactFlash card.
• Check the Ethernet connection.
• Check if [Server service settings] is
• Check if the ODBC setting is
• Please consult your local Mitsubishi
• Change the setting so that type
• Check if data can be written to the
• Please consult your local Mitsubishi
• Check if [Device tag settings] is
• Check if the ERR. LED is on or
• Please consult your local Mitsubishi
• Check if [Device tag settings] is
• Please consult your local Mitsubishi
• Check the data type of the tag
• Check that the operation result
(When the database is Microsoft
Access
When using "Select" and "MultiSelect"
for a field whose data type is single
type or double type, check that
"Microsoft Access Driver (*.mdb)" is
selected in the ODBC setting.
Access
(From the previous page)
Action
correct.
correct.
representative.
conversion will be available in any
case.
device specified for the tag
component.
representative.
correct.
flashing on the MES interface
module.
Section 10.3 Troubleshooting
by symptom
representative.
correct.
representative.
component or the substitute value.
obtained by operation action is
within the range of the data type of
the substitute source tag
component.
®
2007/2010/2013/2016)
Section 8.2 (5) For Microsoft
®
(To the next page)
®
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qj71mes96Qj71mes96nSw1dnc-mesif-e

Table of Contents