Toolbar Configuration - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(5) Help
Item
Product information
Connect to MITSUBISHI
ELECTRIC FA Global Website

7.3.3 Toolbar configuration

This section shows each command provided on the toolbar.
Item
New
Open
Save
Add item
Delete item
Read
Write
Restart
Stop
One-shot execution
Product information
7
- 6 7.3 Screen Structure
7.3.3 Toolbar configuration
Figure 7.9 Help menu
Table 7.5 Help menu items
Displays the product information of the MES Interface Function Configuration
Tool.
Displays the [Connect to MITSUBISHI ELECTRIC FA Global Website] screen.
Figure 7.10 Toolbar
Table 7.6 Toolbar items
Creates a new project.
Retrieves an existing project.
Overwrites and saves the current project.
Adds the item selected in the Edit items tree.
Deletes the item selected in the Edit items tree.
Reads the MES interface function settings (project) from the MES interface
module.
Writes the MES interface function settings (project) to the MES interface module.
Makes the stopped MES interface function operation restart.
Stops the MES interface function operation.
Executes a job as a one-shot task.
Displays the product information of the MES Interface Function Configuration
Tool.
Description
Description
Reference
section
Section 7.14
Reference
section
Section 7.4.1
Section 7.4.2
Section 7.4.3
Section 7.3.4
Section 7.3.4
Section 7.12.3
Section 7.12.2
Section 7.13.2
Section 7.13.2
Section 7.12.6
Section 7.14