Setting Items Of Db Connection Service Setting Tool - Mitsubishi Electric Melsec Q Series User Manual

8
DB CONNECTION SERVICE AND SETTING TOOL

8.5 Setting Items of DB Connection Service Setting Tool

The following shows how to change the DB Connection Service settings.
1
2
3
Set the following items, then click the
After updating the settings, check for an error by selecting [Administrative Tools] -
[Event Viewer] in Windows
Section 10.1 Error Codes
(1) Change the DB Connection Service settings when a job using the DB
Connection Service is not operating.
The status is as follows:
• The programmable controller is powered OFF.
• The MES interface function operation is stopped with [Online] - [Remote
operation] of [MES interface function configuration tool].
Section 7.13.2 Manipulating the operation status of the MES
interface function
(2) When reflecting the settings with a job using DB Connection Service is
running, the execution of the connected job is canceled and a communication
error occurs.
Also, communication errors may occur by the job which was executed after
reflecting the settings. When a communication error occurred in a job that
selected [Enable DB buffering], any SQL text is buffered in the DB buffer.
8.5 Setting Items of DB Connection Service Setting Tool
Reflect settings
®
.
button.
8
- 15
1
2
3
4
5
6
7
8