Mitsubishi Electric Melsec Q Series User Manual page 272

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(10)Multi select setting
7
- 114 7.11 Job Setting - Actions
7.11.2 Setting items in Communication action (Select/Update/Insert/MultiSelect/Delete)
Multi select setting
A click on the
Complete the setting, referring to the following explanation.
After completing the setting, click the
Figure 7.89 [Multi select setting] dialog box
(a) Specify the maximum number of acquiring records
If the [Specify the maximum number of acquiring records] checkbox is checked,
records of up to the specified number are acquired.
The records are acquired in the sorting order set in [Select sort settings].
When selecting this, set a tag for which a value is specified.
1) Tab/Type
Select a tag for which a value is specified.
Note that tags with [Array setting] are not selectable.
2) Component
Select or directly enter a component or a constant value to be specified.
Item
[Number]
Device tag
An error occurs if the specified tag component value is 0 or less.
For error codes, refer to the following.
Section 10.2.1 Error codes for the MES interface module
button displays the [Multi select setting] dialog box.
OK
button.
Table 7.79 Values available for Component
Values available for Component
Within the range of 1 to 40000
Single-precision type, Double-precision type, 16-bit BCD type, or 32-bit
BCD type tag component