Mitsubishi Electric Melsec Q Series User Manual page 435

APPENDICES
Item
16
COMPAREEVAL
17
HANDSHAKESTARTTAG
HANDSHAKESTARTELE
18
MENT
19
HANDSHAKEENDTAG
HANDSHAKEENDELEM
20
ENT
*1
85 (Decimal number)
1010101 (Binary number)
Table App.42 Setting item
Description
When [VALUE] is selected with TYPE and
Comparison
[VALUE] is selected with COMPARETYPE
constant value
When other than the above is selected with TYPE (Blank)
Handshake When [HANDSHAKE] is selected with TYPE
startup - Tag
When other than the above is selected with TYPE (Blank)
Handshake When [HANDSHAKE] is selected with TYPE
startup -
When other than the above is selected with TYPE (Blank)
Component
Completion When [HANDSHAKE] is selected with TYPE
notification - Tag
When other than the above is selected with TYPE (Blank)
Completion When [HANDSHAKE] is selected with TYPE
notification -
When other than the above is selected with TYPE (Blank)
Component
The setting value for the day of the week is expressed in decimal numbers.
For the setting value contents, check with the method below.
1) Convert a decimal number to a binary number.
2) Each binary bit is the setting contents for the day of the week.
b6 b5 b4
Sunday Saturday Friday
Figure App.3 Setting contents for the day of the week
0: Not set
1: Set
(Example) When the WEEK setting value is 85
Convert decimal number into binary number.
Check the corresponding bits.
b6 b5 b4
1 0 1
Sunday Saturday Friday
Monday, Wednesday, Friday, and Sunday are set.
Figure App.4 Setting example for day of the week
Appendix 3 Setting Information File Format (CSV File Format)
Any number or character
string
1 to 64
1 to 256
1 to 64
1 to 256
b3 b2 b1
Thursday Wednesday Tuesday
b3 b2 b1
0 1 0
Thursday Wednesday Tuesday
Appendix 3.12 CONDITION.CSV
9
(From the previous page)
Setting value
10
b0
Monday
b0
1
Monday
App
- 39