Mitsubishi Electric Melsec Q Series User Manual page 353

10
TROUBLESHOOTING
Error code
0A00h
0A01h
0A02h
0A03h
0A04h
0A05h
0A06h
0A07h
0A08h
to
0A0Dh
0A0Fh
0A11h
0A12h
0A13h
0A14h
0A80h
to
0A83h
0A84h
0B00h
to
0B0Ah
Table 10.3 Error codes for the MES interface module
Error name
Initialization error
Start error
The CompactFlash card may be
Stop error corrupted.
Reset error
Tag related error Tag related error
System error —
The initial SNTP server time enquiry
Initial SNTP server time failed, and thereby the module started
enquiry error the operation synchronizing the time
with CPU No.1.
SNTP server time enquiry Failed in the SNTP server time
error enquiry.
The CompactFlash card may be
Setting read error
corrupted.
No CompactFlash card has been
CF access stopped error installed.
File access is stopped (X2 is ON).
No CompactFlash card has been
No CF card installed
installed.
CF directory operation The CompactFlash card may be
error corrupted.
The setting file written to the module is
Transferred setting file invalid.
check error The CompactFlash card may be
corrupted.
The setting file is invalid.
Setting file check error The CompactFlash card may be
corrupted.
System error —
Some action set in the job has an
Illegal action setting error
illegal part.
System error —
Description
10.2 Error Code List
10.2.1 Error codes for the MES interface module
(From the previous page)
Action
• Replace the CompactFlash card.
• Check if the network on the
programmable controller CPU side
is normal.
• Please consult your local Mitsubishi
representative.
• Check for any fault on the network
connected to the specified SNTP
server computer.
• Check if the clock time is
synchronized between the specified
SNTP server and the host server
correctly.
• Check that the time of the specified
SNTP server has not been manually
changed.
• Replace the CompactFlash card.
• Install a CompactFlash card.
• Turn the power OFF and ON, or
reset the programmable controller
CPU.
• Install a CompactFlash card.
• Please consult your local Mitsubishi
representative.
• Check the actions in [Job settings].
• In Job List of [Remote operation],
the job having any illegal action can
be checked. (Such a job is not
displayed.)
• Please consult your local Mitsubishi
representative.
(To the next page)
10
9
10
- 12