Mitsubishi Electric Melsec Q Series User Manual page 288

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(2) Event log
7
- 130 7.12 Online
7.12.5 Checking the working log of the MES interface module
There are two kinds of [Event log] data: [Startup log] and [Detailed log], by which the
job startup history and job execution details can be checked respectively.
(a) Startup log
Startup log data of the jobs, each of which has [Startup logging] setting in [Job
settings], are displayed.
Section 7.10.1 (4) Startup logging
The following explains the display of the Startup log.
1) Icons
Each of icons represents the completion status of a job.
Icon
2) Date
Displays the date and time on which a job is activated.
3) Job
Displays a job that was activated.
4) Summary
Displays trigger conditions.
Display
Startup
Handshake start
Handshake end
(b) Detailed log
Detailed log data of the jobs, each of which has [Test mode] setting in [Job
settings], are displayed.
Section 7.10.1 (5) Test mode
1 Selecting a job of
the [View details] dialog box.
Table 7.87 Icons and their meanings
The job was completed normally. (No detailed log)
The job was completed normally. (With detailed log)
Selecting the job and clicking the
the [View details] dialog box.
The job was canceled. (No detailed log)
The job was canceled. (With detailed log)
Selecting the job and clicking the
the [View details] dialog box.
Table 7.88 Displays in [Summary]
Shows that any job other than handshake operation was activated.
Shows that job execution of handshake operation was activated.
Shows that job execution of handshake operation was completed.
or icon and clicking the
Meaning
View details
button displays
View details
button displays
Description
button displays
View details