Mitsubishi Electric Melsec Q Series User Manual page 226

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
[Trigger 1]
[Trigger 2]
Figure 7.53 Job startup points when [Value monitoring startup] and [Specified time period startup] are
7
- 68 7.10 Job Setting
7.10.2 Setting items in Trigger conditions
(Example)
The following shows that the job is activated when the value of the tag
component (Process 1, Temperature) reaches 45 or higher.
Figure 7.52 [Value monitoring startup] setting example 1
(Example)
To activate the job repeatedly while the condition of [Value monitoring startup]
is met, Make settings as follows:
Table 7.52 [Value monitoring startup] setting example 2
Item
Combination
Trigger 1, Trigger 2
As the condition alternates between true and false as shown below, job startup
can be repeated while the [Value monitoring startup] condition is met.
Timing of [Value monitoring startup]
True
False
Timing of [Specified time period startup]
True
False
Fixed cycle
Timing when AND is used
True
False
Description
[AND]
[Value monitoring startup], [Specified time period startup]
Sampling interval
Combined by AND
Startup point
combined
Tag component value
Condition value