Mitsubishi Electric Melsec Q Series User Manual page 170

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(1) Selecting an item to be imported
(2) Import precautions
7
- 12 7.4 Project File Handling
7.4.4 Importing a project
In the tree, select the item to be imported.
Checked item
Project root
*1
Setting type
Item
*1 When the setting type shown below is selected, items under any other setting type are
automatically selected if they are used for the selected one.
Note that, if an item of the same name exists in the target project, the item is not automatically
selected.
The user must select items to be imported.
Setting type
[Device tag settings]
[Job settings]
There is a limit on the number of settings for each setting type in a project.
Check [Existing registration information] and [Import information], and select items of
each setting type to be imported so that each limit is not exceeded.
Table 7.12 Number of settings available for each setting type
Setting type
[Access target CPU settings]
[Device tag settings]
[Server service settings]
[Job settings]
*2 If an item of the same name exists, it is overwritten and therefore, excluded from the restriction on
the number of settings for each setting type.
Table 7.10 Item to be imported
Item to be imported
All items in the project
All items under the setting type whose checkbox is checked
Each item whose checkbox is checked
Table 7.11 Automatically selected item
Automatically selected item
[Access target CPU settings]
[Device tag settings], [Server service settings]
Allowable number of settings
*2
64
64
32
64