Mitsubishi Electric Melsec Q Series User Manual page 193

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(2) PLC series (QCPU (Q mode)/RCPU, QCPU (A mode), LCPU, QnACPU,
ACPU)
Select the PLC series of the access target CPU.
Select the QCPU (Q mode)/RCPU when accessing a C Controller module.
(3) Multiple CPU specification (No specification, No.1 to No.4)
Select a CPU No. when the access target CPU is used in the multiple CPU system.
When "No specification" is selected, access is made to the control CPU.
(4) Other station specification
Select whether or not to specify any other station. For details on accessible routes,
refer to the following:
(a) No specification
(b) Other station (Single network)
Section 3.2 (2) Accessible routes
Select this when accessing the CPU on the host station.
To access a CPU module on another station over the following network(s), specify
a single network.
1) Using any one of the following networks:
• CC-Link IE Controller Network
• MELSECNET/10
• MELSECNET/H
• CC-Link
• Ethernet
• C24
• CC-Link IE Field Network
Access to a CPU module on another station over CC-Link IE Field
Ex.
Network only
2) Using more than one networks from the following:
• CC-Link IE Controller Network
• MELSECNET/10
• MELSECNET/H
• Ethernet
• CC-Link IE Field Network
Access from a MELSECNET/H network to a CPU module on another
Ex.
station over CC-Link IE Field Network
7.7.1 Setting items in Access target CPU setting
7.7 Access Target CPU Setting
1
2
3
4
5
6
7
8
7
- 35