Project File Handling; Creating A New Project; Opening A Project - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.4 Project File Handling

This section explains how to handle project files.
MES Interface Function Configuration Tool treats the MES interface function settings for a
single MES interface module as one project.

7.4.1 Creating a new project

Create a new project.
When a new project is created, the project currently being edited is discarded.
1

7.4.2 Opening a project

Retrieve an existing project.
1
2
Perform either of the following:
• Click (New).
• Select [Project] [New] from the menu.
Perform either of the following:
• Click (Open).
• Select [Project] [Open] from the menu.
The [Open] dialog box is displayed
Set the following items and click the
Table 7.7 Setting items in the [Open] dialog box
Item
Look in Select the location where the project is stored.
File name Specify a project file name.
Select a project file type.
Files of type
• MES interface function project file (*.mup)
Open
button.
Figure 7.12 [Open] dialog box
Description
7.4 Project File Handling
7.4.1 Creating a new project
1
2
3
4
5
6
7
8
7
- 9