Mitsubishi Electric Melsec Q Series User Manual page 356

10
TROUBLESHOOTING
Error code
0B45h
0B46h
0B47h
0B48h
0B49h
0B4Ah
0B4Bh
0B4Ch
0B4Dh
0B4Eh
0B4Fh
to
0B52h
0B53h
0B54h
0B55h
0B56h
0B57h
to
0B63h
0B64h
10
- 15 10.2 Error Code List
10.2.1 Error codes for the MES interface module
Table 10.3 Error codes for the MES interface module
Error name
Data stored in the DB buffer are
DB buffer content error
invalid.
System error —
Error in conversion from Character strings could not be
character string to number converted to numerical values.
System error —
Error in conversion from Character strings could not be
character string to number converted to numerical values.
System error —
Error in conversion from Character strings could not be
character string to number converted to numerical values.
System error —
Error in conversion from Character strings could not be
character string to number converted to numerical values.
System error —
Assignment to the tag component or
input argument and input/output
Overflow or zero divide
argument of stored procedure was not
error
possible. (Overflow)
Division by zero was attempted.
Operation error Invalid operation was performed.
System error —
Trigger buffer full error The trigger buffer became full.
System error —
DB buffering write error Failed to write data to the DB buffer.
Description
• Check the CompactFlash card.
• If the CompactFlash card is
• Please consult your local Mitsubishi
• Change the setting so that type
• Please consult your local Mitsubishi
• Change the setting so that type
• Please consult your local Mitsubishi
• Change the setting so that type
• Please consult your local Mitsubishi
• Change the setting so that type
• Please consult your local Mitsubishi
• Check the data type or the
• Change the setting to avoid division
• Change the setting so that any
• Please consult your local Mitsubishi
• Reduce the frequency of job
• Please consult your local Mitsubishi
• Change the setting of the DB
• Check if the CompactFlash card is
(From the previous page)
Action
damaged, replace it.
representative.
conversion will be available in any
case.
representative.
conversion will be available in any
case.
representative.
conversion will be available in any
case.
representative.
conversion will be available in any
case.
representative.
substitute value of the tag
component or input argument and
input/output argument of stored
procedure.
by zero.
invalid operation will not performed.
representative.
startups and their processing loads.
representative.
buffering capacity to ensure a
sufficient free space on the
CompactFlash card.
damaged or not.
(To the next page)