Mitsubishi Electric Melsec Q Series User Manual page 130

5
INSTALLATION AND UNINSTALLATION
(3) Settings when Windows Firewall function is enabled
MES Interface Function Configuration Tool is
installed.
DB Connection Service and DB Connection
Service Setting Tool Version 2 (64-bit) is
installed.
DB Connection Service and DB Connection
Service Setting Tool Version 2 (32-bit) is
installed.
DB Connection Service and DB Connection
Service Setting Tool Version 1 is installed.
For the setting method, refer to the manual or online help of the operating system or security software used.
5
- 8 5.1 Installation
After installing MES Interface Function Configuration Tool and DB Connection Service
Setting Tool, the following icons are registered.
®
*1 For Windows Vista
(DBCnctClient) is shown in the list appeared by clicking [Startup].
If the firewall function of the operating system and the security software is enabled,
make one of the following settings.
1) Disable the firewall function.
2) Set the following programs to Exception.
Program Name
MES Interface Function Configuration
Tool
DB Connection Service Setting Tool
Version 2 (64-bit)
DBConnector2_64
DBCnctClient2_64
DB Connection Service Setting Tool
Version 2 (64-bit)
DBConnector2_32
DBCnctClient2_32
DB Connection Service Setting Tool
Version 1
DBConnector
*1
DBCnctClient
*1 The settings are required for Windows Vista
*1
Figure 5.2 Icon registration
or later, "DB Connection Service Client" is installed, and its icon
C:\MELSEC\MESIF\MIFConfigTool.exe
C:\MELSEC\MESIF\DBCnctConf2_64.exe
C:\MELSEC\MESIF\DBConnector2_64.exe
C:\MELSEC\MESIF\DBCnctClient2_64.exe
C:\MELSEC\MESIF\DBCnctConf2_32.exe
C:\MELSEC\MESIF\DBConnector2_32.exe
C:\MELSEC\MESIF\DBCnctClient2_32.exe
C:\MELSEC\MESIF\DBCnctConf.exe
C:\MELSEC\MESIF\DBConnector.exe
C:\MELSEC\MESIF\DBCnctClient.exe
®
Execution file storage location
(if a folder for installation destination is
C:\MELSEC\MESIF\)
or later.