Setting Items In Operation Action - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.11.4 Setting items in Operation action

Configure the settings for operation of tag component values.
Up to 20 dyadic operations can be set for one operation action.
7
- 120 7.11 Job Setting - Actions
7.11.4 Setting items in Operation action
1 Performing the operation for adding or modifying an action displays the [Operation
action] dialog box.
Make the setting referring to the following descriptions.
Clicking the OK
For the operation for adding or modifying an action, refer to the following:
Section 7.11 Job Setting - Actions
1)
8) 9) 10)
button after setting adds or modifies the action.
2) 3) 4)
Figure 7.93 [Operation action] dialog box
5) 6) 7)
11)