Project Setting - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.5 Project Setting

Set the information on the project (project name, comments).
1
2
(1) Project name (Up to 32 characters)
Enter a project name.
For characters that can be used for project names, refer to the following:
variable names, etc. in the product
The set project name is displayed at the project root.
(2) Comment (Up to 2048 characters)
Enter comments about the project as necessary.
For characters that can be used for comments, refer to the following:
variable names, etc. in the product
Click the project root in the Edit items tree.
The "project setting" area is displayed on the detailed setting edit screen.
Set the following items.
Table 7.20 Setting items in [Project setting]
Item
Project name Enter a project name. (Up to 32 characters)
Enter comments about the project as necessary.
Comment
(Up to 2048 characters)
Appendix 2.2 Characters that can be used for item names, component names,
Appendix 2.2 Characters that can be used for item names, component names,
Figure 7.18 [Project setting]
Description
7.5 Project Setting
1
2
3
4
5
6
7
8
7
- 17