Executing A Job As A One-Shot Task - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.12.6 Executing a job as a one-shot task

Execute a job as a one-shot task.
Doing so allows the user to check the execution result of the currently editing [Job
settings].
For precautions for performing one-shot execution, refer to the following:
Section 7.15 (4) One-shot execution
1
2
3
4
In [One-shot execution of a job], settings of [Startup logging] and [DB Buffering]
are not executed.
With the edit screen of [Job settings] displayed, perform either of the following:
• Click (One-shot execution).
• Select [Online] [One-shot execution] from the menu.
Selecting [One-shot execution] updates the setting and perform one-shot execution
of the job, ignoring the trigger conditions.
For [Update settings], refer to the following:
Section 7.13.2 (3)
All of job operations running in the MES interface module are temporarily disabled
during one-shot execution.
Check the execution result shown in the [View details] dialog box, which is displayed
after the execution.
For the display of the [View details] dialog box, refer to the following:
Section 7.12.5 (2) (b) Detailed log
After the one-shot execution, [Update settings] is performed.
Section 7.13.2 (3)
7.12.6 Executing a job as a one-shot task
7
7.12 Online
- 135
1
2
3
4
5
6
7
8