Mitsubishi Electric Melsec Q Series User Manual page 423

Programmable contoller mes interface module
Hide thumbs Also See for Melsec Q Series:
Table of Contents

Advertisement

APPENDICES
*1
For characters can be used in CPU names, refer to the following. For characters that can be used
for describing the name, refer to the following.
etc. in the product
*2
If the same CPU name already exists, the existing name is overwritten.
If the same CPU name is set multiple times, the setting of the label with the higher number is
overwritten.
*3
If the series other than [QCPU] is selected for SERIES, [NO] cannot be selected.
If selected, an error occurs.
*4
Some restrictions apply to the setting values of NET1 and NET2 depending on the combination
(refer to the table below).
If a value is set without following the restrictions, an error occurs.
*5
"QCPU" is displayed even when using C Controller module or RCPU.
SERIES
STATION
SINGLE
QCPU
DIFFERENT
SINGLE
QCPUA
DIFFERENT
SINGLE
LCPU
DIFFERENT
SINGLE
QNACPU
DIFFERENT
SINGLE
ACPU
DIFFERENT
Appendix 2.2 Characters that can be used for item names, component names, variable names,
Table App.27 Setting values of NET1 and NET2
OTHER
NET1
There is no restriction.
There is no restriction.
[ETHERNET], [C24], and
[CCIEFIELD] cannot be set.
[CCLINK] and [C24] cannot be set.
[NET10] cannot be set.
There is no restriction.
[CCIEFIELD] cannot be set.
[CCLINK] and [C24] cannot be set.
[ETHERNET], [C24], and
[CCIEFIELD] cannot be set.
[CCLINK] and [C24] cannot be set.
Appendix 3 Setting Information File Format (CSV File Format)
NET2
-
1) When [NET10], [ETHERNET], or
[CCIEFIELD] is set to NET1, [NET10],
[ETHERNET], or [CCIEFIELD] cannot
be set.
2) When [CCLINK] or [C24] is set to
NET1, [CCLINK] or [C24] cannot be
set.
-
The following values cannot be set.
• [NET10]
• [ETHERNET]
• [CCIEFIELD]
• [C24]
-
1) The following values cannot be set.
• [NET10]
2)
When [NET10], [ETHERNET], or
[CCIEFIELD] is set to NET1,
[CCIEFIELD] cannot be set.
When [CCLINK] or [C24] is set to
3)
NET1, [CCLINK] or [C24] cannot be
set.
-
The following values cannot be set.
• [NET10]
• [ETHERNET]
• [CCIEFIELD]
• [C24]
-
The following values cannot be set.
• [NET10]
• [ETHERNET]
• [CCIEFIELD]
• [C24]
Appendix 3.7 CPU.CSV
9
10
App
- 27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qj71mes96Qj71mes96nSw1dnc-mesif-e

Table of Contents