RIGOL
:TRIGger:SWEep
Syntax
:TRIGger:SWEep <sweep>
:TRIGger:SWEep?
Description
Sets or queries the trigger mode.
Parameter
Name
Type
<sweep>
Discrete
Remarks
AUTO: indicates the auto trigger. In this trigger mode, if the specified trigger condition is not found,
the oscilloscope will force a trigger and data acquisition to display the waveform.
NORMal: indicates the normal trigger. In this trigger mode, only when the specified trigger condition is
found, will the oscilloscope perform a trigger and data acquisition.
SINGle: indicates the single trigger. In this trigger mode, when the specified trigger condition is found,
the oscilloscope performs a single trigger and data acquisition, and then stops.
Return Format
The query returns AUTO, NORM, or SING.
:TRIGger:NREJect
Syntax
:TRIGger:NREJect <bool>
:TRIGger:NREJect?
Description
Turns on or off noise rejection; or queries the on/off status of noise rejection.
Parameter
Name
Type
<bool>
Bool
Return Format
The query returns 1 or 0.
2-196
Range
{AUTO|NORMal|SINGle}
Range
{{1|ON}|{0|OFF}}
Chapter 2 Command System
Default
AUTO
Default
0|OFF
DS4000E Programming Guide