About Circular Connectors - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup

2.3.5.1 About Circular Connectors

The connector pairs (Figure 2-4) feature a sleeve lock configuration, with an
array of pins (male side) coupled to mating sockets (female side).
Figure 2-4. Circular Connector Example
Connection Instructions – Engage all of the alignment and
lock features between the male connector (on the
interconnection cable) and female socket. To install the
male connector into the female connector, do these steps:
Step 1 – Engage the primary and secondary alignment tabs
on the male connector with the mating cutouts on the
female socket.
Step 2 – Push the male connector into the female socket.
Step 3 – Turn the male connector sleeve clockwise until the
sleeve lock cutouts engage fully with the female socket
tabs and you hear a "click" sound.
Feature Description
1 Primary Alignment features
2 Secondary Alignment features
3 Sleeve Lock features
2–11
MN-LPOD
Revision 14