Status | Events - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Ethernet Interface Operation

4.5.4.4 Status | Events

Use this page to see stored events data. Additionally, use it to set the
parameters for how the LPOD triggers events and alarms. Click [Refresh] to see
the latest page data.
Figure 4-20. 'Status | Events' Page
Unread Stored Events
This read-only scrollable window displays the unread stored events log in
sequential, date-stamped format. A running tally of the number of unread stored
events is displayed in the window header. The unit returns and displays the five
oldest stored events in the alarm log. All events that are read from the log are
also automatically removed from the log.
• Select Read Next Five Events to show the next five unread stored events
in the log.
• Select Clear Events Log to clear all stored events from the log.
• Select Initialize Events Pointer to reset the internal pointer to allow
queries to start at the beginning of the stored events log.
Click [Submit] to update the window according to your selection.
4–29
MN-LPOD
Revision 14