Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Appendix A
A.2 1:1 Redundancy Mode
In 1:1 Redundancy Mode, the unit that is currently not the active (online) unit (as
determined by the switch position) becomes the controlling backup (offline)
unit.
A.2.1
Ethernet-based Monitor and Control
See Chapter 4. ETHERNET INTERFACE OPERATION for detailed
information about using this interface.
Figure A-1. Ethernet-based M&C using CEFD Kit KT-0000203
Ethernet-based Remote Monitor and Control (M&C) of any LPOD Standalone or
1:1 Redundancy application is available through use of the optional LPODnet
M&C Netbook Accessory Kit (CEFD Kit KT-0000203). This kit provides you with
on-site access to the LPOD's remote Telnet, SNMP, or HTTP (Web Server)
A–2
MN-LPOD
Revision 14
Advertisement
Table of Contents
