LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup
2.3.3 Connector 'J3 | POWER IN' AC Power Mains
WARNING!
FOR SAFETY REASONS, MAKE SURE YOU KNOW THAT THE 'J3 |
POWER IN' AC POWER CONNECTION PIN ASSIGNMENTS ARE
DIFFERENT FOR EACH LPOD UNIT. YOU MUST USE THE CORRECT PIN
ASSIGNMENTS.
INCORRECT USE OF PIN ASSIGNMENTS CAN RESULT IN PRODUCT
DAMAGE OR PERSONAL INJURY.
For all LPOD models, the prime power input requirement is as follows:
• 90-264V AC
• 47-63 Hz
The power supply is power factor corrected. The total power required from the
prime power supply depends on the model used. See Sect. 1.5 Summary of
Specifications for more information.
2–5
MN-LPOD
Revision 14