Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Serial Interface Operation
Controller-to-Target
Instruction Code and
Parameter Type
Qualifier
(* indicates
End-of-Life)
Command
Query
RF Power FET
N/A
RFS?
current Status
Arguments for
Command or
Query
Length varies
Query only.
depending on
Returns currents, in amps, for all installed FETs.
the number of
EXAMPLE: <0001/RFS? {CR}
installed FETs
>0001/RFS={CR}
Q01=.xxx{CR}
Q02=.xxx{CR}
Q03=xx.x{CR}
Q04=xx.x{CR}
Q05=xx.x{CR}
Q06=xx.x{CR}
Q07=xx.x{CR}
Q08=xx.x{CR}
Q09=xx.x{CR}
Q10=xx.x{CR}
Q11=xx.x{CR}
Q12=xx.x{CR}
Q13=xx.x{CR}
Q14=xx.x{CR}
Q15=xx.x{CR}
Q16=xx.x{CR}{LF}
NOTE: If the reported value is ≥1A, the format is xx.x; if the value is <1A, the format is .xxx
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
5–25
MN-LPOD
Revision 14
Target-to-Controller
(see Description of Arguments)
Response to
Response to
Command
Query
RFS=
RFS=x....x
Advertisement
Table of Contents
