Connector 'J9 | Output Sample' (Ps 2 Only); Connectors 'J10 | Modem Rx' And 'J11 | Lnb' (Optional Interfaces) - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup

2.3.6 Connector 'J9 | OUTPUT SAMPLE' (PS 2 ONLY)

2.3.7 Connectors 'J10 | MODEM Rx' and 'J11 | LNB'
(Optional Interfaces)
The 'J10 | MODEM Rx' and 'J11 | LNB' ports are both Type 'N' female
connectors, providing both bias and a reference signal to a Low Noise Block
Converter (LNB), and passing the LNB's L-Band output to the modem's Rx input.
Figure 2-5. LPOD 'J10 | Modem Rx' and 'J11 | LNB' Connectors
The 'J9 | OUTPUT SAMPLE' port is a Type 'N'
female connector available only on the PS 2 model.
It provides a nominal -40 dB sample of the output
signal. A calibration label is provided near the
connector that shows the actual coupling values vs.
frequency.
2–12
MN-LPOD
Revision 14