Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
MN-LPOD
Ethernet Interface Operation
Revision 14
Click [Submit] to save.
Calibrate LNB Current
Calibrate the LNB only when it is running at nominal operating conditions.
The value provided here (in mA) is intended as a reference point. The alarm upper
and lower thresholds are determined by this value and the LNB current window
setting.
Click [Calibrate] to perform an LNB calibration and display the updated read-only
value.
4–22
Advertisement
Table of Contents
Need help?
Do you have a question about the LPOD PS 1.5 and is the answer not in the manual?
Questions and answers