Comtech EF Data LPOD PS 1.5 Installation And Operation Manual page 147

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Serial Interface Operation
Controller-to-Target
Instruction Code and
Parameter Type
Qualifier
(* indicates
End-of-Life)
Command Query
Retrieve Firmware N/A FRW?
Number
Global Amplifier GAC= GAC?
Configuration
Initialize Events IEP= N/A
Pointer
Arguments for
Command or
Query
Query only.
Returns the Boot, Bulk1, and Bulk2 firmwares loaded into the unit, each firmware load [a,b,c] is in the form FW-
AAAAAAA B.B.BB DD/MM/YY where:
FW-AAAAAAA=the firmware part number
B.B.BB=the version number
DD/MM/YY=Day/Month/Year firmware released
EXAMPLE: <0001/FRW?{CR}
>0001/FRW={CR}
Boot: {CR}
FW-0000082 0.0.1a 04/09/08{CR}
Bulk1: {CR}
FW-0000078 0.0.1a 04/09/08{CR}
FW-0000080 0.0.1a 04/09/08{CR}
FW-0000081 0.0.1a 04/09/08{CR}
Bulk2: {CR}
FW-0000078 0.0.1a 04/09/08{CR}
FW-0000080 0.0.1a 04/09/08{CR}
FW-0000081 0.0.1a 04/09/08{CR}{LF}
43 bytes Command or Query.
Sets or returns the global status of the LPOD, semicolon delimited, in the form aa.aa;b;ccccc;d;e;f;g;h;j;k;l;m;n;o
where:
a=redundancy mode (ESW)
b=online status (ONL)
cc.cc=Attenuation Offset (AOF)
dd.dd=Customer Attenuation(ATT)
e=Auto Fault Recovery (AFR)
fffff=Unit Alarm Mask (MSK)
g=LNB Current Source (LCS)
hh=LNB Current Window (LCW)
i=LNB Current Window Enable (CWE)
j=Enable Statistics Averaging (ESA)
k=Set Statistics Interval (SSI)
l=Enable Statistics Logging (ESL)
m=Auxiliary Mute (AUX)
n=user mute state (MUT)
o=RF power amplifier state (AMP)
COMMAND EXAMPLE: <0001/GAC=a;b;cc.cc;dd.dd;e;fffff;g;hh;I;j;k;l;m;n;o;{CR}
None Command only.
Resets internal pointer to allow RNE? queries to start at the beginning of the stored events log. This command
takes no arguments.
EXAMPLE: <0001/IEP={CR}
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
5–17
MN-LPOD
Revision 14
Target-to-Controller
(see Description of Arguments)
Response to Response to
Command Query
FRW= FRW=Boot:[a]:{
CR}Bulk1:{CR}[a
]{CR}[b]{CR}[c]{
CR}Bulk2:{CR}[a
]{CR}[b]{CR}[c]{
CR}{LF}
GAC= GAC=x....x
GAC*
GAC?
GAC#
IEP= N/A
IEP?
IEP*