Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Appendix A
A.2.2
Serial-based Monitor and Control
The EIA-232 Interface is not available for 1:1 Redundancy.
See Chapter 5. SERIAL INTERFACE OPERATION for detailed information
about the remote commands and queries cited in this section. See
Chapter 4. ETHERNET INTERFACE OPERATION for the HTTP (Web
Server) Interface M&C counterparts for the operands as referenced in
the sections that follow.
Figure A-2. Serial-based M&C using CEFD Kit KT-0020518
Serial-based Remote Monitor and Control (M&C) of any LPOD Standalone or 1:1
Redundancy application is available through use of the optional CLC-10
Handheld Terminal M&C Accessory Kit (CEFD Kit KT-0020518). This kit provides
you with on-site access to the LPOD's serial remote control interface. For
A–4
MN-LPOD
Revision 14
Advertisement
Table of Contents
