Http Interface User Login; Figure 4-6. Lpod Http Interface "Splash" Page Example - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Ethernet Interface Operation

4.4.2 HTTP Interface User Login

Do these steps:
1. From the PC, enter the default Management IP Address for the LPOD (i.e.,
http://192.168.1.4) into the Address area of the browser.
2. In the Login window, type the User name and Password, and then click
OK. The default User Name and Password are both comtech.
Once the valid User Name and Password is accepted, the LPOD HTTP
Interface splash page shows (Figure 4-6). The unit and firmware version
in this example will differ from your setup.

Figure 4-6. LPOD HTTP Interface "Splash" Page Example

4–10
MN-LPOD
Revision 14