Lpod Ps 1.5 'J3 | Power In' Dc Power Main; Lpod Ps 2 'J3 | Power In' Dc Power Main; Table 2-5. Lpod Ps 1.5 'J3 | Power In' Pin Assignments; Table 2-6. Lpod Ps 2 'J3 | Power In' Pin Assignments - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup

2.3.4.2 LPOD PS 1.5 'J3 | POWER IN' DC Power Main

The mating connector specification and the pin assignments
specific to the LPOD PS 1.5 DC power interface are as follows:
Mating Connector:
CEFD P/N CN-0020517 (MS3116E-14-5S(476), Amphenol PT06E-14-
5S(476))

Table 2-5. LPOD PS 1.5 'J3 | POWER IN' Pin Assignments

Pin
A
B
C
D
E

2.3.4.3 LPOD PS 2 'J3 | POWER IN' DC Power Main

The mating connector specification and the pin assignments
specific to the LPOD PS 2 DC power interface are as follows:
Mating Connector:
CEFD P/N CN/CA3106E2222SB (ITT Cannon CA3106E22-22SB)

Table 2-6. LPOD PS 2 'J3 | POWER IN' Pin Assignments

Pin
A
B
C
D
LPOD PS 1.5 Assignment
+48V
+48V
-48V
-48V
GND
LPOD PS 2 Assignment
V+
NO CONNECT
NO CONNECT
V-
2–8
MN-LPOD
Revision 14