Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup
2.5 Set the LPOD Power ON
WARNING!
FOR SAFETY REASONS, NEVER TURN THE UNIT ON WITHOUT PROPER
WAVEGUIDE TERMINATION ON THE 'J2 | RF OUT' PORT. YOU MAY
OTHERWISE BE EXPOSED TO DANGEROUSLY HIGH ELECTROMAGNETIC
LEVELS.
The LPOD does not have a 'Power On/Off' switch. You may power ON the unit by
connecting the 'J3 | POWER IN' connector to the appropriate prime power
source. The Mute or Transmit status of the SSPA automatically comes up in the
last stored state (factory default = Transmit on, not muted).
2–24
MN-LPOD
Revision 14
Advertisement
Table of Contents
