Chapter 2. SYSTEM OPERATION
This section contains instructions for operating the HPOD outdoor SSPA. The primary
customer interface to the HPOD is via the Remote Communications port. This section
defines in detail the customer interface.
2.1 I
C
NTERFACE
ONNECTORS
Figure 2-1. Interface Connectors
2.1.1 C
J1: RF IN
ONNECTOR
The RF Input connector is a type N female. Typical input levels (-30 dBm) depend on
desired output power and unit attenuation. To prevent damage to the SSPA, RF input
levels should not exceed +15 dBm.
2–1