Spar-Mounted Installations (Lpod Ps 1, Ps 1.5) - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
System Connectors, Installation, and Startup Revision 14

2.4.4 Spar-Mounted Installations (LPOD PS 1, PS 1.5)

PS 2 units may not be spar-mounted due to weight considerations.
LPOD PS 1 and PS 1.5 standalone configurations, in addition to satellite dish
support pole mounted installations, may be installed on the antenna spar. Figure
2-11 shows a typical Comtech EF Data spar mount SSPA installation.
The kit that is required for the installation of your LPOD system (Figure 2-12) is
determined by the spar that is used by the antenna's manufacturer.
Figure 2-11. SSPA Spar Mount Installation Example
2–21