Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Ethernet Interface Operation
4.5.3.3 Config | Utility
Use this page to configure additional LPOD operating parameters. Click [Refresh]
to see the latest page data.
Figure 4-15. 'Config | Utility' Page
Date and Time
• Enter a date using international format in the form DD/MM/YY (where
DD = day [01 to 31], MM = month [01 to 12], and YY = year [00 to 99]).
• Enter a time using HH:MM:SS format (where HH = hour [00 to 23],
MM = minutes [00 to 59], and SS = seconds [00 to 59]).
Click [Change Date/Time] to save the changes.
Circuit ID
Enter a Circuit ID (unit identification label) string of up to 48 characters. This is
the identification label for the unit.
4–23
MN-LPOD
Revision 14
Advertisement
Table of Contents
