Table 2-7. Lpod Ps 2 'J3 | Power In' 48Vdc Pin Assignments - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
System Connectors, Installation, and Startup
2.3.4.4 LPOD PS 2 'J3 | POWER IN' 48VDC Power Main
Option
The connector type and mating connector specification and the pin assignments
specific to the LPOD PS 2 48VDC power interface option are as follows:
Unit Connector Type:
CEFD P/N CN-0000288 (ITT Cannon CA3102E20-15SB-F80A232)
Supplied Mating Connector:
CEFD P/N CN-0000289 (ITT Cannon CA3106E20-15SB-F80A232)

Table 2-7. LPOD PS 2 'J3 | POWER IN' 48VDC Pin Assignments

Pin
A
B
C
D
E
F
G
Notes:
1) Use 12 AWG wire to each of the appropriate pins, according to the
individual pin assignments.
2) As an alternative, the ground connection can be made to the unit's external
ground stud.
LPOD PS 2 Assignment
V+
V+
NO CONNECT
NO CONNECT
V-
V-
GROUND (Note 2)
2–9
MN-LPOD
Revision 14