Comtech EF Data LPOD PS 1.5 Installation And Operation Manual page 116

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Ethernet Interface Operation Revision 14
Click Change CID to save the change.
Current Active Firmware Image: # (read-only)
This read-only window shows the Current Active Firmware Image. In this
example, Image 1 is the Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select the Next Reboot Image as Image 1 or 2.
Click [Submit] to save the change.
Perform Soft Reboot
Click [Reboot Now] to reboot the LPOD using the Current Active Firmware
Image.
Firmware Information (read-only)
This read-only window shows information about the currently loaded Bootrom.
For the complete Bulk1 and Bulk2 information, scroll through all the constituent
firmware blocks that make up the bulk.
Part Number (read-only)
This read-only window shows factory assigned part number for the unit.
4–24