Use The Serial Interface To Find The Firmware Information - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Firmware Update
• The 'Summary' section of the 'Status | Summary' page provides
the firmware details as "FW Revision", "Active Software Image",
and "Next Reboot Image", as shown in this example:
2. Write down your firmware information for further reference or to provide
to Comtech EF Data Product support.

3.2.3.2 Use the Serial Interface to Find the Firmware Information

Chapter 5. SERIAL INTERFACE OPERATION
Use your terminal emulator program or CLC-10 to execute remote queries with
the LPOD. Use either of these remote queries to find the firmware information:
• Condensed : <0/SWR?{CR}
(returns the firmware version numbers running under Boot, Bulk1, and
Bulk2, in the form B.B.BB)
• Detailed : <0/FRW?{CR}
(returns the complete information of the firmwares running under Boot,
Bulk1, and Bulk2 in the form FW-AAAAAAA B.B.BB DD/MM/YY,
where:
o FW-AAAAAAA = the firmware part number
o B.B.BB = the firmware version number
o DD/MM/YY = the firmware release date (Day/Month/Year)
3–6
MN-LPOD
Revision 14