Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Ethernet Interface Operation
4.5.4 Status Pages
Use these pages to access to event logging, operational statistics, status, FET
windows, and operational trending graphs. Click the Status tab, and then click the
Summary, Status, FETs, Events, Statistics, or Trending Graphs hyperlink to
continue.
4.5.4.1 Status | Summary
Click [Refresh] to see the latest page data.
Figure 4-17. 'Status | Summary' Page
Summary
The Summary Fault line indicates that no faults are present with "OK" on green
background. If a fault exists, the Summary Fault message changes to "FAULT" on
a red background. Should this occur, review the logged faults and alarms on the
Status | Events page (see Sect. 4.5.4.4).
Terminal Status Change
This section alerts you to any configuration changes that were made to the unit
since the last time the Terminal Status Change flag was reset (i.e., you click
[Clear] to reset the message):
• If the status displays NO, no changes have been made to the unit.
• If the status displays YES, then a status change has occurred for one or
more of the following reasons:
4–26
MN-LPOD
Revision 14
Advertisement
Table of Contents
