Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Preface
Recommended Standard Designations
Electronic Industries Association (EIA) designations supersede Recommended
Standard (RS) designations. Reference to the old RS designations may appear
where it might concern actual text (e.g., RS-232) displayed on the product panels
and on screens or pages in the Serial Remote or HTTP (Web Server) Interfaces.
All other references in the manual refer to EIA designations.
CAUTION
It is important that you review and understand the Safety and
Compliance information that follows.
Safety and Compliance
Electrical Safety and Compliance
CAUTION
NEUTRAL FUSING – DOUBLE POLE/NEUTRAL FUSING IS USED ON THE PRIME
POWER SUPPLY INPUT.
This equipment has been designed to minimize exposure of personnel to
hazards. For further information, contact Comtech EF Data Product Support. The
operators and technicians must:
• Know how to work around, with, and on high voltage equipment.
• Exercise every precaution to ensure personnel safety.
• Exercise extreme care when working near high voltages.
• Be familiar with the warnings presented in this manual.
Installation Guidelines Regarding Power Line Quality
Comtech EF Data has become familiar with the varying quality of the AC power
grid around the world. Observing the following installation guidelines should
help ensure a reliable installation.
• Surge suppression – High voltage surges can cause failure of the power
supply. These surges are typically caused by circuit switching on the main
AC power grid, erratic generator operation, and also by lightning strikes.
xvii
MN-LPOD
Revision 14
Advertisement
Table of Contents
