Table of Contents
Advertisement
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Ethernet Interface Operation
Click [Change IP Address] to save any changes.
System Account Access Information
Name fields can be any alphanumeric combination with a maximum length of 10
characters.
Password fields can be any alphanumeric combination with a maximum length
of 10 characters.
• Admin, Read/Write, and Read Only Names and Passwords – The factory
defaults for these names/passwords are:
o Admin
o Read/Write
o Read Only
• SMTP Server: Enter the mail server IP address from where you want to
send the e-mail.
• SMTP Domain Name / Destination: The Administrator can assign the
SMTP Domain Name and Destination. This is required if you wish to use
the e-mail feature of the 'Home | Support' Page (Sect. 4.5.1.3).
o For SMTP Domain Name, enter the domain of the e-mail server
(usually found to the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination, enter the e-mail recipient name
(usually found to the left of the @ symbol in an e-mail address).
Click Submit Access to save any changes.
Webpage Timeout
The Webpage Timeout sets the time period that can pass before the HTTP
Interface pages time out.
• Use the drop-down list to select 5 minutes (default) or 8 hours.
• Click Submit.
The Status | Status page automatically refreshes once every ten
seconds, and resets the timeout counter.
comtech/comtech
opcenter/1234
monitor/1234
4–17
MN-LPOD
Revision 14
Advertisement
Table of Contents
