Make A Temporary Folder (Subdirectory) On The User Pc; Use Windows Desktop To Make A Folder - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Firmware Update
3.2.4 Make a Temporary Folder (Subdirectory) on the
User PC
The temporary folder is where you store the firmware archive download. There
are several ways you can make a temporary folder on a Windows PC:
• To use the Windows Desktop, see Section 3.2.4.1.
• To use Windows Explorer, see Section 3.2.4.2.
• To use the Run and Browse windows, see Section 3.2.4.3.
• To use Windows Command-line or the Command Prompt, see Section
3.2.4.4.
1) These examples specify drive letter "c:". You can use any valid,
writable drive letter.
2) Typical for many of the tasks that follow, type the command as
instructed and then press Enter.
After you make the temporary folder, proceed to Section 3.3 to download and
extract the firmware files.

3.2.4.1 Use Windows Desktop to Make a Folder

Do these steps:
1. Right-click anywhere on the desktop to open the popup submenu.
2. Select New > Folder to make the new, temporary folder on the desktop.
3. Right-click on the new folder and then select Rename from the popup
submenu. Rename this folder to "temp" or some other convenient,
unused name.
3–7
MN-LPOD
Revision 14