Control And Data Cables - Comtech EF Data LPOD PS 1.5 Installation And Operation Manual

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Appendix B
B.2 Control and Data Cables
CEFD
App B
CABLE DESCRIPTION
FIG
P/N
CA- Serial Interface Cable
B-1
0020526 (19-pin circular connector to RJ-11)
CA- Ethernet Interface Cable
B-2
0000352 (19-pin circular connector to <2X> RJ-45)
CA- 100' COMMS Cable
B-3
0000318 (19-pin circular connector to bare end)
CA- 250' COMMS Cable
B-4
0000543 (19-pin circular connector to bare end)
Rx / Tx Redundant Loop Cable
CA- (19-pin circular receptacle to <2X> Type
B-5
0020655 'N' connectors, <2X> 19-pin circular
connectors)
Tx-only Redundant Loop Cable
CA- (19-pin circular receptacle to <1X> Type
B-6
0020657 'N' connector, <2X> 19-pin circular
connectors)
USED FOR:
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6
| COM1' receptacle to CLC-10 RJ-11 communications jack
(Cable and CLC-10 are furnished as part of optional CEFD KIT KT-0020518 )
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6
| COM1' receptacle to LPODnet Ethernet jack
(Cable and LPODnet are furnished as part of optional CEFD KIT KT-0000203 )
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6
| COM1' receptacle to user-specified M&C interface
Interconnecting 1:1 Redundancy System LPOD units, Rx / Tx switches, and
user M&C interface
Interconnecting 1:1 Redundancy System LPOD units, Tx switch, and user
M&C interface
B-2
MN-LPOD
Revision 14
REF App A FIG
A-1, A-3, A-12
through A-30
A-2, A-3, A-12
through A-30
A-3, A-12
through A-30
A-3, A-12
through A-30
A-3, A-12
through A-30
A-3, A-12
through A-30