Eject Expired Cleaning Media With The Sl150 User Interface; Replace Expired Cleaning Media With New Media; Import The New Cleaning Media Into The Library - Oracle StorageTek SL150 User Manual

If the Cleaning Tape Status is OK, stop here.
5.
If the Cleaning Tape Status indicates that the cartridge has expired and the
6.
cartridge resides in a host application-managed storage slot, use the host
application to eject the cartridges, and
page 5-8.
If the Cleaning Tape Status indicates that the cartridge has expired and you keep
7.
cleaning cartridges in reserved system slots,
the SL150 User Interface.

Eject Expired Cleaning Media with the SL150 User Interface

Log in to the browser-based user interface under the Operator, Service, or
1.
Administrator role.
Select Library from the menu at left.
2.
In the graphical library map, click on the expired cleaning cartridge.
3.
When the context menu appears, select Move Tape. The Move Tape panel appears
4.
at the top of the screen. The Source type field should be set to Slot and the
cartridge that you chose should be listed (you may change this selection if
desired).
In the graphical library map, click on a free mailslot cell. The Destination type
5.
field of the Move Tape panel should now identify the Mailslot cell that you
selected (you may change this selection if desired).
In the Move Tape panel, press the OK button to perform the move or Cancel to
6.
abort.
When the Move Tape panel shows that the move is complete, press the OK button
7.
to close the panel.
Repeat the above procedure from step 2 to step 6 until all expired cleaning
8.
cartridges have been moved to the mailslot.

Replace Expired Cleaning Media With New Media

9.
Replace Expired Cleaning Media With New Media
Carry out the procedure
1.
the expired media.
Dispose of expired media promptly, so that dirty cartridges are not inadvertently
2.
reimported and reused.
Load the required number of new cleaning cartridges into the library mailslot,
3.
using the procedures for
page 5-7.
Import the New Cleaning Media into the
4.

Import the New Cleaning Media into the Library

If the cleaning cartridges are assigned to host-managed storage slots, use the
1.
application to move the new cleaning cartridges from the mailslot to the storage
slot(s) that the application uses for cleaning media. Stop here.
Otherwise, log in to the browser-based user interface under the Operator, Service,
2.
or Administrator role.
Select Library from the menu at left.
3.
"Move Cartridges into the Mailslot"
Eject Expired Cleaning Media with
"Move Cartridges into the Mailslot"
Loading and Unloading Individual Cartridges
Library.
Maintaining Tape Drives
on
as soon as possible.
on page 5-8. Remove
on
Maintenance and Upgrades 7-5