Omron SCARA R6Y-XC Series User Manual page 15

(3) Follow the instructions on warning labels and in this manual.
Warning label 3 (Fig. 1-3) is affixed to the robot. See Fig. 2-2 to Fig. 2-4
for the locations of warning labels.
• Be sure to read the warning label and this manual carefully and make
you thoroughly understand the contents before attempting installation
and operation of the robot.
• Before starting the robot operation, even after you have read through this
manual, read again the corresponding procedures and cautions in this
manual as well as descriptions in this chapter (Chapter 1, "Using the Ro-
bot Safely").
• Never install, adjust, inspect or service the robot in any manner that does
not comply with the instructions in this manual.
WARNING
IMPROPER INSTALLATION OR OPERATION CAN RESULT IN SERIOUS
INJURY OR DEATH.
READ USER'S MANUAL AND ALL WARNING LABELS BEFORE
OPERATION.
(4) Do not use the robot in environments containing inflammable gas, etc.
WARNING
• THIS ROBOT WAS NOT DESIGNED FOR OPERATION IN
ENVIRONMENTS WHERE INFLAMMABLE OR EXPLOSIVE SUBSTANCES
ARE PRESENT.
• DO NOT USE THE ROBOT IN ENVIRONMENTS CONTAINING
INFLAMMABLE GAS, DUST OR LIQUIDS. EXPLOSIONS OR FIRE COULD
OTHERWISE RESULT.
(5) Do not use the robot in locations possibly subject to electromagnetic
interference, etc.
WARNING
AVOID USING THE ROBOT IN LOCATIONS SUBJECT TO
ELECTROMAGNETIC INTERFERENCE, ELECTROSTATIC DISCHARGE
OR RADIO FREQUENCY INTERFERENCE. MALFUNCTION MAY
OTHERWISE OCCUR.
WARNING
Improper Installation or operation can
result in serious injury or death.
Read user's (owner's) manual and all
warning labels before operation.
■Fig. 1-3 Warning label 3
1-3
CHAPTER 1 Using the Robot Safely