Occupant Restraint System - Aston Martin Vantage Manual

To Save A Memory Position
Warning: Do not attempt to adjust the driver's seat whilst
driving.
Adjust the seat, steering column and the exterior rear view
mirrors to the desired position. Push the memory button (M),
then press the required memory channel (1, 2 or 3) to save the
positions. A chime is heard and a message will show in the
message centre to confirm. By repeating these steps and pressing
an unused button, a second and third driving position can be
saved in the memory.
Recalling a Memory Position
Once in the seat press button 1, 2 or 3 (depending on which
saved channel is required) until all movement is stopped. The
seat will move to the saved position.
Seat and steering wheel movement will be interrupted if the
memory channel button is released. Exterior mirror movement
will continue. Press and hold the memory channel button to
complete seat and steering wheel movement.
Emergency Stop
If the seat accidentally begins to move, press any seat control
button to stop the seat.

Occupant Restraint System

The system provides protection to the driver and all passengers in
a variety of impact conditions.
The system consists of:
• Driver and passenger safety belts with dual pre-tensioners and
load limiting systems.
• Driver and passenger dual-stage airbags.
• Driver and passenger seat side airbags.
• Front Passenger Airbag Deactivation (PAD) switch (Market
specific).
• Driver and passenger roof mounted curtain airbag (coupe).
• Driver and passenger door mounted curtain airbag (roadster).
• Static Roll Over Protection System (ROPS) (roadster).
3.9
Before Driving