Cruise Control, Window And Gearshift Switches; Seat Control Switch Panels - Aston Martin DB7 Workshop Manual

lEM^-^?
Electrics
Control Switch - Removal Procedures
6.5.07 Cruise Control, Window and
Gearshift Switches
Procedure
1. Protect the wood finisher around the switches.
6.5.08 Seat Control Switch Panels
Procedure
1. Remove the wood trim above the passenger side
dash.
2. Remove the ashtray (Fig 1 -1).
Figure 7. Switch Removal
2. Using a suitable lever, raise each end of the switch
to release the spring clips.
3. Pull the switch clear oi the wood finisher and
disconnect the switch wiring.
Figure!. Ashtray and Ashtray Well
3. Remove the gear selector knob.
4. Release the screw in the ashtray well (Fig 1-2)
securing the gearshift and centre console surround.
5. Raise the console surround and support it to gain
access to the seat control panel.
6. Disconnect the multi-plug in the seat switch loom.
7. Remove 2 screws (Fig 2-1) and the seat control
switches.
Figure 2. Seat Control Switch Panel Removal
May 1996
6-9