Installation Conditions - Omron R88M-W60010T User Manual

System Design and Installation
3-1

Installation Conditions

3-1-1 Servo Drivers
Space Around Drivers
■
• Install Servo Drivers according to the dimensions shown in the following illustration to ensure
proper heat dispersion and convection inside the panel. Also install a fan for circulation if Servo
Drivers are installed side by side to prevent uneven temperatures from developing inside the panel.
• Take the control cable's connector direction into account when installing the Servo Drivers.
Fan
W
30 mm min. W = 10 mm min.
■ Mounting Direction
Mount the Servo Drivers in a direction (perpendicular) such that the lettering for the model number,
and so on, can be seen.
Operating Environment
■
The environment in which Servo Drivers are operated must meet the following conditions.
• Ambient operating temperature: 0 to +55 ° C (Take into account temperature rises in the individual
• Ambient operating humidity:
• Atmosphere:
Ambient Temperature
■
• Servo Drivers should be operated in environments in which there is minimal temperature rise to
maintain a high level of reliability.
• Temperature rise in any Unit installed in a closed space, such as a control box, will cause the ambi-
ent temperature to rise inside the entire closed space. Use a fan or a air conditioner to prevent the
ambient temperature of the Servo Driver from exceeding 55 ° C.
• Unit surface temperatures may rise to as much as 30 ° C above the ambient temperature. Use heat-
resistant materials for wiring, and keep separate any devices or wiring that are sensitive to heat.
50 mm min.
Fan
W
50 mm min.
Servo Drivers themselves.)
20% to 90% (with no condensation)
No corrosive gases.
Air
Side panel
Air
Chapter 3
3-3